Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Symphony 125
Part: Clock

In this mini guide for all Sym Symphony 125 owners, discover how to manually change the time displayed on the central dashboard. First, insert the key and turn on the ignition. Then, locate the two buttons on the right side and hold down the "Set" button until the time starts to flash. At this point, use the "Mode" button to change each digit of the hours and minutes. To switch from hours to minutes, press the "Set" button. Once finished, hold down "Set" again to save the changes.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Symphony 125 Let's briefly look at the instructions that will allow us to change the time on the display of the instrument panel of the Sym Symphony 125 ST scoote…
Symphony 125 In this tutorial, you will learn how to reset the service on a SYM Symphony 125 scooter, a very simple and quick operation to perform only after comp…
Symphony 125 To replace the drive belt on the Sym Symphony 125, first remove the bolts securing the cover; then you can take off the cover to access the transmiss…

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos