Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses on the Sym Symphony 125?

Model: Sym Symphony 125
Part: Fuse box

Video tutorial

To locate the fuses on the Sym Symphony 125, open the under-seat compartment by lifting the seat after unlocking the latch. At this point, proceed to loosen all the screws securing the internal drawer of the under-seat compartment to its housing.

Once the screws are loosened and the appropriate connectors are disconnected, you can completely remove the compartment: on its lower right side, you will find the small fuse box, where each of the internal fuses can be replaced with a new one.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Sym Symphony 125?
How to Change the Engine Oil on a Sym Symphony 125?
Symphony 125 To change the engine oil on a Sym Symphony 125, loosen the screws securing the oil drain plug located at the central bottom of the vehicle. Once remo…
How do you replace the engine oil of the Sym Symphony 125?
How do you replace the engine oil of the Sym Symphony 125?
Symphony 125 To replace the engine oil of the Sym Symphony 125, you need to loosen the drain plug located in the central lower part of the motorcycle: once the pl…
How to Replace the Transmission on the Sym Symphony 125?
How to Replace the Transmission on the Sym Symphony 125?
Symphony 125 To replace the transmission on the Sym Symphony 125, you will need to loosen the screws that secure the corresponding cover, which will be positioned…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos