Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Sym Joymax 250i

Model: Sym Joymax 250
Part: Antifreeze coolant

Video tutorial

Today, in this video tutorial, we will see how to bleed and top up the coolant or antifreeze in the Sym Joymax 250i scooter. First, place the scooter on its centre stand and start by disconnecting the coolant hose connected to the water pump casing, allowing the fluid to drain into a container for about ten minutes.

Now, unscrew the cap of the radiator reservoir, located under the footboard cover, and top up with new antifreeze (suitable for our radiator); fill it to the maximum mark!


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Top Up Coolant on Sym Joymax 250-250i-300
How to Top Up Coolant on Sym Joymax 250-250i-300
Joymax 250 In today's tutorial video, learn how to top up the coolant on a Sym Joymax 250-250i and 300 scooter. First, remove the plastic cover that conceals th…
How to Replace the Coolant on a Sym Joymax 250i
How to Replace the Coolant on a Sym Joymax 250i
Joymax 250 This guide will show you the steps to bleed and top up the coolant on the Sym Joymax 250i scooter. First, place your scooter on the centre stand and …
How to Replace the Radiator Fluid on Sym Joymax 250i
Joymax 250 In this video, see how to replace the radiator fluid on a Sym Joymax 250i - 300i scooter by following these simple steps. First, remove the plastic c…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos