Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the headlight bulb on the Sym MaxSym 400, loosen the screws located under the windscreen at the front of the motorcycle to remove it. Once the windscreen is removed, unscrew the additional screws securing the front fairing, which are located under the handlebars and on the sides of the headlights. By detaching the fairing and subsequently the instrument panel, you will gain access to the interior of the headlights. At this point, disconnect the old bulbs from their connectors, remove them from the headlights, and replace them with new spare parts.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Sym MaxSym 400
How to Replace the Front Headlight Bulb of the Sym MaxSym 400
Maxsym 400 In this guide, we will go through the instructions to remove and replace the front headlight bulb of the Sym MaxSym 400. First, place your scooter on…
How do you replace the headlight bulb of the Sym MaxSym 400?
How do you replace the headlight bulb of the Sym MaxSym 400?
Maxsym 400 In order to replace the headlight bulb of the Sym MaxSym 400, you need to loosen the screws that secure the front panel of the motorcycle to its hous…
How to Remove the Front Fairing of a Sym MaxSym 400
How to Remove the Front Fairing of a Sym MaxSym 400
Maxsym 400 Before you can start, position your Sym MaxSym 400 on the centre stand. Begin by removing the rear-view mirrors by unscrewing the securing screws. Ne…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos