Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a SYM Fiddle Scooter

Model: Sym Fiddle
Part: Brake pads

Video tutorial

In this tutorial, you will learn how to replace the front brake pads on a SYM Fiddle scooter, a very simple and quick operation. First, position yourself in front of the brake in question, then loosen the two pins using an Allen key and unscrew the two bolts with a socket spanner.

Next, separate the caliper from the fork, fully remove the pins, and take out the old pads. At this point, clean any dirt residue, fit the new parts, and reassemble everything by simply following the reverse procedure.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the SYM Fiddle Scooter?
How to Change the Engine Oil on the SYM Fiddle Scooter?
Fiddle In this tutorial, you will see how to change the engine oil on the SYM Fiddle scooter, a very simple and quick operation. First, ensure that the engi…
How to Replace the Front Indicator Bulbs on the Sym Fiddle 3
How to Replace the Front Indicator Bulbs on the Sym Fiddle 3
Fiddle This brief guide shows you how to remove and replace the front indicator bulbs by replacing the entire units on the Sym Fiddle 3 scooter. First, plac…
How to Replace the Speedometer Cable on the Sym Fiddle
How to Replace the Speedometer Cable on the Sym Fiddle
Fiddle In this video tutorial, you will learn how to dismantle and replace the speedometer cable on the Sym Fiddle scooter by following these simple and qui…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos