Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sym
  4. : Vf 185

Model: Sym Vf 185
Part: Clock

To set the clock on the Sym VF 185, turn the key in the ignition to power on the instrument cluster: this will activate the instrument cluster and allow you to use the buttons below it. Press and hold the M button until the hours start to flash: this will enable you to change the hours by pressing the S button. At this point, you can perform the same operation to change the minutes: hold the M button until they start to flash, and by pressing the S button, you can modify them.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Vf 185 In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the…

How to Perform Routine Maintenance on the Benelli 502C

In this short and simple guide, you will learn how to perform routine maintenance on the Benelli 502C motorcycle. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then replace both the engine oil and the oil filter. Next, check the correct tension of the drive chain by adjusting it at the wheel nut; finally, check the brake fluid and coolant levels, and inspect the brake wear!

Watch the video!


by ScegliAuto

More videos