Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Altroz
    4. : Antenna

Tata Altroz - Antenna

Tata Altroz (2020-2024 / MK 1)
How to replace the radio antenna on the Tata Altroz
If we want to customize our car by replacing the antenna with a model that has a shorter shaft and that has higher performance in the reception of radio …read all…
Posted on 24 May 2022 by ScegliAuto
Tata Altroz (2020-2024 / MK 1)
How to mount the shark fin antenna on the Tata Altroz
It is possible to mount a shark fin antenna on the car, these are kits that can be purchased online. To do this, proceed as follows: remove the antenna …read all…
Posted on 29 April 2024 by ScegliAuto
Antenna (2) Car stereo (1) Spark plugs (1) Bodywork (1) Key (2) -board computer (2) Checks and maintenance (2) Air filter (1) Cabin air filter (2) Headlight bulb (1) Door panel (1) Instrument cluster (2) Wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos