Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Altroz
    4. : Wheel

Tata Altroz - Wheel

Tata Altroz (2020-2024 / MK 1)
How to paint the wheel covers on the Tata Altroz
If we want to proceed with customizing our car by painting the wheel covers, we will find information on how to proceed in the description below and we can …read all…
Posted on 6 June 2023 by ScegliAuto
Tata Altroz (2020-2024 / MK 1)
How to turn the wheel trims of the Tata Altroz into rims that look like alloy.
In this video we see how to paint the metal wheel covers of our Tata Altroz, to make them look like alloy wheels. We remove the wheel covers and clean the iron …read all…
Posted on 8 May 2023 by ScegliAuto
Tata Altroz (2020-2024 / MK 1)
How to paint the surface of the wheel covers on the Tata Altroz
If we want to proceed to customize the car by painting the wheel covers with the desired color paint, we can follow the instructions given in the description …read all…
Posted on 7 May 2023 by ScegliAuto
Antenna (2) Car stereo (1) Spark plugs (1) Bodywork (1) Key (2) -board computer (2) Checks and maintenance (2) Air filter (1) Cabin air filter (2) Headlight bulb (1) Door panel (1) Instrument cluster (2) Wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos