Do it yourself
Frequently asked questions about cars and motorcycles

How to Bypass the Immobiliser on the Tata Xenon?

Model: Tata Xenon MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Control unit

Video tutorial

The only solution to bypass the immobiliser on a Tata Xenon is to bridge the wires on the car's ECU. Understand that this is a delicate operation best performed by a qualified auto electrician rather than attempting it yourself without electrical knowledge.

The risk is that the car may not start or could show errors, leading to more significant problems.

In any case, the video shows the wires to cut and bridge to bypass the immobiliser. The ECU is located under the steering wheel in the fuse area.

Pause the video as you cut and reconnect the wires to ensure accuracy.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Tata Xenon (2007-2024 / MK 1) In this tutorial, we will see how to replace the cabin air filter in a Tata Xenon. Start by sitting in the passenger seat, then lean down under the d…
Tata Xenon (2007-2024 / MK 1) To change the engine oil and the corresponding filter, follow the instructions provided below and in the video tutorial. First, open the bonnet and u…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos