Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Lights on the Tata Safari Storme?

Model: Tata Safari Storme MK 1 - Years 2012-2019
Part: Fog lights

To replace the fog lights on the Tata Safari Storme, first completely remove the front bumper of the car. To do this, unscrew the bolts securing it, located in the inner wheel wells and at the top of the bumper. Once all these screws are removed, detach the bumper to access the screws securing the fog light and disconnect its connector. This will allow you to connect the new fog light to the connector and secure it in its housing.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on Tata Safari Storme
How to Replace the Fuel Filter on Tata Safari Storme
Tata Safari Storme (2012-2019 / MK 1) This guide will show you how to remove and replace the fuel filter on the Tata Safari Storme. First, open the hood and locate the fuel filter; you wi…
How to Replace the ECU on the Tata Safari Storme
How to Replace the ECU on the Tata Safari Storme
Tata Safari Storme (2012-2019 / MK 1) To replace the ECU on the Tata Safari Storme, open the hood to access the components inside the engine bay. The ECU is located immediately behind the…
How to Replace the Front Brake Pads on a Tata Safari Storme
How to Replace the Front Brake Pads on a Tata Safari Storme
Tata Safari Storme (2012-2019 / MK 1) To replace the front brake pads on a Tata Safari Storme, lift the vehicle so that the corresponding front wheel is off the ground. Once it is lifted,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos