Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Tata Safari Storme

Model: Tata Safari Storme MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

Video tutorial

To replace the front brake pads on a Tata Safari Storme, lift the vehicle so that the corresponding front wheel is off the ground. Once it is lifted, loosen the bolts that secure it to the hub and completely remove the wheel.

Then, you can unscrew the bolts that secure the brake caliper to the brake rotor, allowing the pads inside to be removed and replaced with new replacement parts. After installing the new pads, you can remount the wheel.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Tata Safari Storme?
How to Replace the Rear Brake Pads on the Tata Safari Storme?
Tata Safari Storme (2012-2019 / MK 1) To replace the rear brake pads on the Tata Safari Storme, lift the vehicle with a jack so that the corresponding wheel is off the ground. Then, loose…
How to Replace the Fog Lights on the Tata Safari Storme?
How to Replace the Fog Lights on the Tata Safari Storme?
Tata Safari Storme (2012-2019 / MK 1) To replace the fog lights on the Tata Safari Storme, first completely remove the front bumper of the car. To do this, unscrew the bolts securing it, …
How to Replace the Fuel Filter on Tata Safari Storme
How to Replace the Fuel Filter on Tata Safari Storme
Tata Safari Storme (2012-2019 / MK 1) This guide will show you how to remove and replace the fuel filter on the Tata Safari Storme. First, open the hood and locate the fuel filter; you wi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos