Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Tata Tiago

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Brake pads

To replace the brake pads on the Tata Tiago, raise the front of the vehicle and remove the bolts from the left front wheel. Using a socket wrench, remove the lower bolt that holds the brake caliper and loosen the upper one. Lift the brake caliper and remove the worn brake pads from the bracket. Take the new pads and install them in the bracket in place of the old ones, with the friction material facing the rotor. Lower the brake caliper (if it is difficult to lower, use a clamp to push the caliper piston back parallel). Tighten the two bolts and then reinstall the wheel by tightening the bolts. Repeat the same procedure on the right side.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Brake Pads on a Tata Tiago
Replace the Front Brake Pads on a Tata Tiago
Tata Tiago (2016-2024 / MK 1) In this brief and simple guide, see the steps to remove and replace the front brake pads on a Tata Tiago. First, lift the vehicle with a jack and rem…
How to Replace the Cabin Filter in a Tata Tiago?
How to Replace the Cabin Filter in a Tata Tiago?
Tata Tiago (2016-2024 / MK 1) As you can see in this tutorial, replacing the cabin filter in a Tata Tiago is an extremely simple and quick operation. First, position yourself in t…
How to Replace the Air Filter in Your Tata Tiago
How to Replace the Air Filter in Your Tata Tiago
Tata Tiago (2016-2024 / MK 1) If the air filter in your Tata Tiago is worn out and no longer provides optimal performance, you need to replace it. Here’s how to do it safely and i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos