Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Brake Pads on a Tata Tiago

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Brake pads

In this brief and simple guide, see the steps to remove and replace the front brake pads on a Tata Tiago. First, lift the vehicle with a jack and remove the front wheel; then leverage the brake caliper piston inward, as shown in the video. At this point, unscrew the bolts on the back of the brake caliper; once removed, you can take out the old brake pads, cleaning any residual dirt from the caliper. Finally, install the new high-quality brake pads!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a Tata Tiago
How to Replace the Brake Pads on a Tata Tiago
Tata Tiago (2016-2024 / MK 1) To replace the brake pads on the Tata Tiago, raise the front of the vehicle and remove the bolts from the left front wheel. Using a socket wrench, re…
How to Replace the Front Wipers of the Tata Tiago
How to Replace the Front Wipers of the Tata Tiago
Tata Tiago (2016-2024 / MK 1) In this short and simple guide, see how to remove and replace the front wipers of the Tata Tiago by following the instructions below. First, move to …
Windshield Wiper Replacement for the Tata Tiago
Windshield Wiper Replacement for the Tata Tiago
Tata Tiago (2016-2024 / MK 1) Today, in this tutorial video, you will learn how to disassemble and replace the front wipers, as well as the rear wiper, of the Tata Tiago. First, m…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos