Do it yourself
Frequently asked questions about cars and motorcycles

Windshield Wiper Replacement for the Tata Tiago

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Windshield wipers

Today, in this tutorial video, you will learn how to disassemble and replace the front wipers, as well as the rear wiper, of the Tata Tiago. First, move to the front of your car and lift the wiper arm; then, rotate and detach the wiper blade from the arm, as shown in the video. At this point, replace the wiper blade with a new one of the correct type; insert it and securely attach it to the wiper arm by rotating it, applying the same procedure for replacing the other blades!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Tiago (2016-2024 / MK 1) In this short and simple guide, see how to remove and replace the front wipers of the Tata Tiago by following the instructions below. First, move to …
Tata Tiago (2016-2024 / MK 1) The fuses of the Tata Tiago are housed in dedicated fuse boxes installed in the vehicle: this type of car has two fuse boxes. The first is located in…
Tata Tiago (2016-2024 / MK 1) The fuse boxes installed in the Tata Tiago contain the fuses that regulate the operation of the devices installed in the vehicle: in this car model, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos