Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Tata Zest

Model: Tata Zest MK 1 - Years 2014-2019
Part: Air filter

To replace the engine air filter on this car model, follow the description below. In the video above, you will find all the necessary information and instructions for the correct replacement. First, lift the hood and locate the box containing the filter, which is in the center of the compartment. Next, unscrew the screws securing the filter box cover to remove it. Then, take the new filter and place it in the housing, ensuring that the replacement is compatible with the vehicle. Finally, take the filter cover and secure it back onto the box.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Air Filter in the Tata Zest?
How to Remove the Cabin Air Filter in the Tata Zest?
Tata Zest (2014-2019 / MK 1) Removing the cabin air filter in the Tata Zest, as shown in this tutorial, is an extremely simple and quick task. First, position yourself in the pas…
How to Replace the Oil Filter on a Tata Zest?
How to Replace the Oil Filter on a Tata Zest?
Tata Zest (2014-2019 / MK 1) To replace the oil filter on a Tata Zest, open the hood to access the components inside the engine compartment. You will need to remove the plastic c…
Where Are the Fuses Located in the Tata Zest?
Where Are the Fuses Located in the Tata Zest?
Tata Zest (2014-2019 / MK 1) The fuses in the Tata Zest are located in dedicated fuse boxes installed in the vehicle. This type of vehicle has two fuse boxes. The first is locate…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos