Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Air Filter in the Tata Zest?

Model: Tata Zest MK 1 - Years 2014-2019
Part: Cabin air filter

Removing the cabin air filter in the Tata Zest, as shown in this tutorial, is an extremely simple and quick task. First, position yourself in the passenger seat, then lean under the dashboard and locate the long rectangular door at the junction with the center tunnel. Next, unscrew the fastening screws of the door with a Phillips screwdriver, open it, and pull out the air filter. At this point, you can proceed with cleaning or replacing it, making sure to insert it in the correct direction.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter on the Tata Zest
How to Change the Cabin Air Filter on the Tata Zest
Tata Zest (2014-2019 / MK 1) If you need to replace the cabin air filter on this car model because you noticed that the airflow from the vents is very low, the description below …
How to Replace the Oil Filter on a Tata Zest?
How to Replace the Oil Filter on a Tata Zest?
Tata Zest (2014-2019 / MK 1) To replace the oil filter on a Tata Zest, open the hood to access the components inside the engine compartment. You will need to remove the plastic c…
How to Reset the Service Light on a Tata Zest?
How to Reset the Service Light on a Tata Zest?
Tata Zest (2014-2019 / MK 1) To reset the Service light on a Tata Zest, turn on the instrument panel by turning the ignition key in the ignition switch. Once the panel is on, pre…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos