Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Tata Hexa Mk1 maintenance light

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Warning light – error code

This guide shows how to reset the Tata Hexa Mk1 maintenance light. With the instrument panel on, with the right stalk of the steering wheel, position the external selector on "SET" to enter the vehicle service menu. At this point, by pressing the button at the top of the key, select the “Service reset†item and, keeping the same button pressed, enter the tab. Press and hold the key until the light reset item is highlighted. Exit the menu by selecting the return item. Return to the initial page of the instrument panel by moving the selector to “TRIP†. The operation is thus completed.

Posted on 28 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb on the Tata Hexa?
How do you replace the headlight bulb on the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) In order to replace the bulb in the Tata Hexa headlight, you need to open the bonnet in order to access the rear part of the headlight corresponding …
Replacing the headlight bulb of the Tata Hexa
Replacing the headlight bulb of the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today we will see, in this video tutorial, how to disassemble and replace the headlight bulb of the Tata Hexa, following these simple and quick steps…
How to Reset the Service Light on a Tata Hexa
How to Reset the Service Light on a Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today, we will explain how to reset the service light on a Tata Hexa vehicle. Turn on the vehicle's instrument cluster and move the right steering wh…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos