Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Tata Hexa

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Headlight bulb

To replace the headlight bulb on a Tata Hexa, open the hood to access the back of the headlight corresponding to the bulb that needs to be replaced. Here, you will need to remove the circular cover of the headlight by disconnecting the connector and pulling the bulb out of its housing. Once the old bulb is removed, connect the new one to the connector and insert it into its housing. After installation, check that the new bulb works correctly.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Tata Hexa
Replacing the Headlight Bulb on the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today, you will see in this video tutorial how to disassemble and replace the headlight bulb on the Tata Hexa, following these simple and quick steps…
Guide to Replacing the Headlight Bulb on a Tata Hexa
Guide to Replacing the Headlight Bulb on a Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today, we will see in this brief and simple guide how to remove and replace the headlight bulb on a Tata Hexa. First, open the hood of your car and s…
How to Remove the Rear Headlight in the Tata Hexa?
How to Remove the Rear Headlight in the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) In this tutorial, you will see how to remove the rear headlight in the Tata Hexa, a very simple and quick operation. First, ensure the key is not in …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos