Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Tata Magic

Model: Tata Magic MK 1 - Years 2007-2024
Part: Engine oil

If you want to proceed with a DIY engine oil and filter change on this vehicle, you will find the instructions and information on how to do so in the description below and in the video. On this model, the engine is located under the passenger seat. Therefore, to access it, you need to remove the seat, and underneath you will find the oil fill cap that you will remove. Then, locate the oil drain plug under the vehicle that you will unscrew, along with the filter. Take the appropriate wrench and proceed to unscrew the filter and replace it with the new one after changing the gasket. Next, screw the drain plug back in and finally return to the engine compartment to fill the system with new oil.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Tata Magic
How to Change the Engine Oil in a Tata Magic
Tata Magic (2007-2024 / MK 1) Here are the main instructions for changing the engine oil while performing routine maintenance on the Tata Magic. First, lift the vehicle and start …
How to Change the Engine Oil and Filter on the Tata Magic
How to Change the Engine Oil and Filter on the Tata Magic
Tata Magic (2007-2024 / MK 1) If you want to replace the engine oil and filter on this vehicle model, the following description provides the instructions and steps to follow for t…
How to Connect the Car Radio in a Tata Magic
How to Connect the Car Radio in a Tata Magic
Tata Magic (2007-2024 / MK 1) It's nice to travel while listening to music, and it's great when you can choose music from your smartphone and play it on your car radio. If you hav…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos