Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Air Filter on a Tata Nano?

Model: Tata Nano MK 1 - Years 2008-2015
Part: Air filter

In this tutorial, see how to remove the air filter on a Tata Nano. This operation is very simple and quick, to be done when you need to clean or replace it directly. First, wait for the engine to be completely cold, then go to the rear of the vehicle and lift the bottom of the boot to access the engine. Once done, locate the filter box on your right, unscrew the fastening screw of the cap, and loosen the metal clip. Finally, extract the filter from its housing and proceed with cleaning or replacement, depending on your needs.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Nano (2008-2015 / MK 1) In this tutorial, you will see how to replace the air filter in a Tata Nano Twist, an extremely simple and quick operation. First, wait for the engin…
Tata Nano (2008-2015 / MK 1) To replace the interior light bulb on a Tata Nano, you need to detach the light fitting covering it, located just behind the internal rear-view mirro…
Tata Nano (2008-2015 / MK 1) Replacing the air filter in your Tata Nano is one of the most important yet simple maintenance tasks. This guide will describe the necessary steps to…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos