Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Tata Nano Twist?

Model: Tata Nano MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

Video tutorial

In this tutorial, you will see how to replace the air filter in a Tata Nano Twist, an extremely simple and quick operation. First, wait for the engine to cool completely, then flip up the rear seat, open the engine compartment, and disconnect the intake manifold by loosening the metal band screw.

Once done, remove the bolt from the airbox cover, take it off, and extract the old filter. Finally, clean the inside of the housing from any debris, insert the new filter, and reassemble everything by following the reverse procedure.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Tata Nano?
How to Remove the Air Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) In this tutorial, see how to remove the air filter on a Tata Nano. This operation is very simple and quick, to be done when you need to clean or repl…
How to Replace the Air Filter in the Tata Nano
How to Replace the Air Filter in the Tata Nano
Tata Nano (2008-2015 / MK 1) Replacing the air filter in your Tata Nano is one of the most important yet simple maintenance tasks. This guide will describe the necessary steps to…
How to Replace the Diesel Filter on a Tata Nano?
How to Replace the Diesel Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos