Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Filter on a Tata Nano?

Model: Tata Nano MK 1 - Years 2008-2015
Part: Diesel fuel filter

The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the part at the rear of the tank. Disconnect the hoses connected to the filter and free it from the supports that hold it in its housing. Once the old filter has been removed, insert the new replacement part, securing and connecting it properly. After installation, ensure that everything functions correctly.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Nano (2008-2015 / MK 1) In this tutorial, you will see how to replace the air filter in a Tata Nano Twist, an extremely simple and quick operation. First, wait for the engin…
Tata Nano (2008-2015 / MK 1) In this tutorial, you will see how to replace the cabin air filter in the Tata Nano, a very simple and quick operation. First, sit in the driver's se…
Tata Nano (2008-2015 / MK 1) To change the engine oil of the Tata Nano, access the underside of the car where the oil drain plug is located. Unscrew this plug to collect the used…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos