Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. 530 Fi
    4. : Change oil and engine filter on Tm Racing 530

Model: Tm Racing 530 Fi
Part: Engine oil
Change oil and engine filter on Tm Racing 530

As shown in the video, unscrew the upper filling cap and the lower drain plug (both holes are free to avoid vacuum) of the oil filter compartment and collect the used oil in a tray. It is advisable to run the engine for a couple of minutes to make the lubricant less dense and facilitate its escape. Unscrew the two screws that hold the protective plastic of the oil filter. Remove the old piece and simply insert the new one, perhaps lubricating it a little before assembly. Close the oil drain hole and pour in the new lubricant from the upper hole.


Posted on 26 December 2023 by ScegliAuto



Change engine oil and relative filter on Tm Racing 530
530 Fi Start the engine for a few minutes to warm the oil making it less dense and then favoring its escape. Place a pan under the engine oil filter compart
How do you remove the engine of the TM Racing 530 FI?
530 Fi In order to remove the engine of the TM Racing 530 FI, you first need to loosen the components that prevent its removal by unscrewing the screws that

How to change the engine oil and its filter on the Triumph Bonneville T100

The guide shows you how to change the Triumph Bonneville T100 engine oil. The first operation to perform is to position the motorcycle safely on the side stand. At this point, with an 8 mm wrench, unscrew the oil pan drain bolt and drain the fluid into a container for disposal. Unscrew the oil filter, located in a recess near the previously opened bleed valve, and let the remaining oil flow into the container. Remove the oil tank cap to make it easier to drain the liquid. At this point, mounted a new gasket on the cap, tighten it in place at 25 Newton Meters. Grease the filter gasket and mount it in place; if you have a special wrench, tighten the filter to 10 Newton Meters. Position the motorcycle on the central stand, top up the engine oil; check the window to see the level. Start the engine for a few minutes and then top up.

Watch the video!


by ScegliAuto

More videos