Do it yourself
Frequently asked questions about cars and motorcycles

Model: Tm Racing 530 Fi
Part: Engine

To remove the engine from the TM Racing 530 FI, first loosen the components that prevent its removal by unscrewing the screws that secure the seat to its housing and the corresponding side fairings. Once all these elements have been removed, proceed to unscrew the screws that fix the engine to the appropriate supports, and then disconnect the connectors related to the sensors. Once all these fixing elements have been removed, you can completely slide the engine block out of its housing and insert the new one.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

530 Fi As shown in the video, unscrew the upper filler cap and the lower drain plug (both holes should be opened to avoid a vacuum) of the oil filter housin…
530 Fi Start the engine for a few minutes to warm the oil, making it less viscous and easier to drain. Position a container under the engine oil filter area…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos