Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Fluid Recovery System on TM Racing SMR 125?

Model: Tm Racing Smr 125
Part: Checks and maintenance

This video is currently unavailable

To install the fluid recovery system, first purchase the necessary part: using a drill, enlarge the holes present on the part to allow the hoses to pass through more easily. Then, secure the part to the lower section of the frame and insert the hoses through the previously enlarged holes.

Each hose must be connected to a different part of the bike: two hoses should be connected to the left side of the bike, where air needs to be drawn in. The other two should be connected to the internal part of the bike, which is more difficult to reach.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Mix Fuel for the TM Racing Smr 125
Smr 125 In this brief guide, we will go through the steps on how to correctly mix fuel for the TM Racing Smr 125 enduro bike. First, position yourself at the…
Replacing the Front Brake Fluid Reservoir on a TM Racing SMR 125
Smr 125 In this video tutorial, you will learn how to remove and replace the front brake fluid reservoir on a TM Racing SMR 125. First, open the cap of the r…
How to Fit the Pad on the Front Wheel and the Brake Cap on Tm Racing SMR 125
How to Fit the Pad on the Front Wheel and the Brake Cap on Tm Racing SMR 125
Smr 125 In this video, you will see how to make some aesthetic and functional modifications on a Tm Racing SMR 125 motorcycle, following the instructions pro…

How to Change the Engine Oil in a Piaggio Vespa 125 LX Scooter?

In this tutorial, you will learn how to change the engine oil in a Piaggio Vespa 125 LX scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough. Then, position a container underneath the scooter, locate the drain bolt, and loosen it with a socket spanner. Allow all the oil in the system to drain out. Next, remove the secondary filter and clean it of any dirt residue. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos