Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake and Clutch Levers on a TM Racing SMR 125

Model: Tm Racing Smr 125
Part:

This video is currently unavailable

In this video, you will see how to remove the clutch lever from a TM Racing SMR 125 in simple steps. First, remove the gasket around the lever; then, remove the lever guard by unscrewing the fixing screws using a 10 mm spanner and a Torx key. At this point, unscrew the clutch lever screw, being careful of the spring inside.

Finally, reassemble the new lever by tightening the screw and the nut underneath, applying the reverse procedure for reassembly; the replacement of the lever guard will be illustrated next!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Replacing the Brake and Clutch Levers on TM Racing SMR 125
Replacing the Brake and Clutch Levers on TM Racing SMR 125
Smr 125 In this video tutorial, we will see how to dismantle and replace the brake and clutch levers on a TM Racing SMR 125 motorcycle. First, remove the clu…
How to replace the clutch actuator on the TM Racing SMR 125?
How to replace the clutch actuator on the TM Racing SMR 125?
Smr 125 To replace the clutch actuator on the TM Racing SMR 125, loosen the screws that secure it to its housing on the left side of the bike, right next to …
Replacing the Clutch Cover on TM Racing SMR 125
Replacing the Clutch Cover on TM Racing SMR 125
Smr 125 In this video tutorial, learn how to remove and replace the clutch cover on a TM Racing SMR 125. First, drain the engine oil by undoing the oil drain…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos