Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. En 250
    4. : How do you replace the piston of the TM Racing EN 250?

Model: Tm Racing En 250
Part: Checks and maintenance
How do you replace the piston of the TM Racing EN 250?

In order to replace the piston of the TM Racing EN 250 it is necessary to loosen the screws that fix the cylinder cover in the upper part: once the screws have been removed, the cylinder can be opened and the relative seeger ring can also be removed. In this way it will be possible to disconnect the connecting rod from the piston and extract the latter from inside the cylinder. At this point it will be possible to connect the new piston to the connecting rod and insert it inside the cylinder. After insertion, it will be possible to close the cylinder by fixing everything with the appropriate screws and the seeger ring.


Posted on 14 August 2022 by ScegliAuto



How do you disassemble the engine of the TM Racing EN 250?
En 250 To disassemble the engine of the TM Racing EN 250, you need to loosen the screws that fix the engine block to its housing: by loosening the screws th
How do you remove the engine of the TM Racing EN 250?
En 250 In order to remove the engine of the TM Racing EN 250 it is necessary to loosen the screws that secure the saddle to its housing and the relative sid
How do you adjust the tension of the cables of the TM Racing EN 250?
En 250 In order to adjust the tension of the clutch and brake cables of the TM Racing EN 250 you must first of all identify the aforementioned cables: these

How to change the engine oil and its filter on the Triumph Bonneville T100

The guide shows you how to change the Triumph Bonneville T100 engine oil. The first operation to perform is to position the motorcycle safely on the side stand. At this point, with an 8 mm wrench, unscrew the oil pan drain bolt and drain the fluid into a container for disposal. Unscrew the oil filter, located in a recess near the previously opened bleed valve, and let the remaining oil flow into the container. Remove the oil tank cap to make it easier to drain the liquid. At this point, mounted a new gasket on the cap, tighten it in place at 25 Newton Meters. Grease the filter gasket and mount it in place; if you have a special wrench, tighten the filter to 10 Newton Meters. Position the motorcycle on the central stand, top up the engine oil; check the window to see the level. Start the engine for a few minutes and then top up.

Watch the video!


by ScegliAuto

More videos