Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Tm Racing En 250
Part: Engine

To disassemble the engine of the TM Racing EN 250, you need to loosen the screws that fix the engine block to its housing: by loosening the screws that fix the engine to the frame, you will also be able to loosen those that fix the intake and exhaust pipes, then disconnect the connectors related to the sensors. In this way, you can proceed by removing the cylinder from the top and disconnecting the piston inside from the connecting rod; at this point, you can remove the connecting rod from the engine shaft and access the additional components at the base of the engine block.

Posted on 21 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install the TM Racing EN 250 Engine Guard Plate
How to Install the TM Racing EN 250 Engine Guard Plate
En 250 To install the engine guard plate on the TM Racing EN 250, insert the two supports into the inner part of the plate and secure them with the correspo…
How to Remove the Engine from the TM Racing EN 250
How to Remove the Engine from the TM Racing EN 250
En 250 To remove the engine from the TM Racing EN 250, loosen the screws that secure the seat to its housing and the side panels of the bike. Once these com…
How to Replace the Piston on TM Racing EN 250
How to Replace the Piston on TM Racing EN 250
En 250 To replace the piston on the TM Racing EN 250, loosen the screws securing the cylinder cover at the top. Once the screws are removed, you can open th…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos