Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Toyota C Hr
    4. : Air filter

Toyota C Hr - Air filter

Air Filter Toyota C Hr (2016-2023 / ax 50, mk 1, ax 10)

Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10)
Replacement of the engine air filter for the Toyota CH-R
Below we will see the instructions that will allow us to disassemble and replace the engine air filter of the Toyota CH-R. First, we open the hood of the car …Read all…
Posted on 19 October 2025 by ScegliAuto
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10)
How to Replace the Air Filter on a Toyota C-HR
In this video tutorial, we can see how to replace the air filter on a Toyota C-HR. The first thing to do is to purchase a new air filter. Get inside the …Read all…
Posted on 27 July 2026 by ScegliAuto
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10)
Maintaining the Battery Filter on Toyota CHR
Go under the right rear seat. Remove the clip by unscrewing it with a screwdriver and then take off the fixed plastic cover. Clean the now-exposed fan using an …Read all…
Posted on 2 May 2026 by ScegliAuto
Car stereo (2) Battery (8) Spark plugs (1) Body (1) Key (24) Onboard computer (6) Checks and maintenance (14) Dashboard (1) Air filter (3) Cabin air filter (2) Parking brake (1) Accessory kit (1) Side marker bulb (1) Headlight bulb (3) Interior dome light bulb (2) License plate light (3) Engine oil (1) Clock (7) Rear bumper (1) Tires (1) Shift knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Warning light – error code (9) (31) Tire pressure warning light (16) Service warning light (41)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos