Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Toyota C Hr
    4. : License plate light

Toyota C Hr - License plate light

License Plate Light Toyota C Hr (2016-2023 / ax 10, mk 1, ax 50)

Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50)
Replacement of the license plate lights of the Toyota CH-R.
In this short guide, we will go over the instructions that will allow us to disassemble and replace the license plate lights of the Toyota CH-R. First, let's …Read all…
Posted on 4 January 2026 by ScegliAuto
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50)
How to Replace the Number Plate Bulb of the Toyota C-HR?
To replace the number plate bulb of the Toyota C-HR, open the rear hatch to allow access to pry off the internal trim panel near the light. Once this panel is …Read all…
Posted on 5 October 2026 by ScegliAuto
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50)
Replacing Number Plate Bulb on Toyota CHR
Replacing the number plate bulbs on the Toyota CHR is very simple: the bulb holders are located in the strip just above the number plate itself, below the …Read all…
Posted on 20 June 2026 by ScegliAuto
Car stereo (2) Battery (8) Spark plugs (1) Body (1) Key (24) Onboard computer (7) Checks and maintenance (17) Dashboard (1) Air filter (3) Cabin air filter (2) Parking brake (1) Accessory kit (1) Side marker bulb (1) Headlight bulb (3) Interior dome light bulb (2) License plate light (3) Engine oil (1) Clock (7) Rear bumper (1) Tires (1) Shift knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Warning light – error code (9) Tire pressure warning light (47) Service warning light (43)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos