Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate lights of the Toyota CH-R.

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: License plate light

See other generations:
Video tutorial

In this short guide, we will go over the instructions that will allow us to disassemble and replace the license plate lights of the Toyota CH-R. First, let's open the rear hatch of the trunk and begin by removing the square plastic cap located on the inner trim; this will allow us to disconnect the electrical connector of the license plate light by turning the socket to remove the bulb, as shown in the video.

At this point, we replace and install the new license plate light, making sure it is the correct type and has the same fitting; we then reassemble and connect the light, checking its functionality.


Posted on 4 January 2026 by ScegliAuto


Related tutorials

Replacing Number Plate Bulb on Toyota CHR
Replacing Number Plate Bulb on Toyota CHR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Replacing the number plate bulbs on the Toyota CHR is very simple: the bulb holders are located in the strip just above the number plate itself, belo…
How to Replace the Number Plate Bulb of the Toyota C-HR?
How to Replace the Number Plate Bulb of the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the number plate bulb of the Toyota C-HR, open the rear hatch to allow access to pry off the internal trim panel near the light. Once this…
How do you reset the Service light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) On the Toyota C-HR instrument panel, it will be possible to completely make the Service light disappear by turning on the instrument panel and pressi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos