Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintaining the Battery Filter on Toyota CHR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
This video is currently unavailable

Go under the right rear seat. Remove the clip by unscrewing it with a screwdriver and then take off the fixed plastic cover.

Clean the now-exposed fan using an air compressor. Extract the filter from the plastic cover by disconnecting it from the two small attachments and clean it with compressed air. If the filter is too dirty or worn, replace it: to install it, simply insert it the correct way so that the two small hooks align.

Reattach the plastic cover with the filter and secure it with the initially removed clip. This is the procedure to follow when the car indicates "Hybrid battery cooling parts maintenance required".


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Maintenance Indicator on Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) This guide explains how to reset the tyre maintenance indicator on a Toyota C-HR. It's a very simple operation: enter the vehicle, turn on the instru…
How to Reset the Tyres on a Toyota C-HR
How to Reset the Tyres on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The video demonstrates how to reset the tyre pressure on a Toyota C-HR. The first step is to ensure the car is stationary, not in motion. Navigate th…
How to Replace the Remote Battery of a Toyota CHR?
How to Replace the Remote Battery of a Toyota CHR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) This short video tutorial shows how to change the battery of the key remote for a Toyota CHR. The operation is very simple and requires no tools. Tak…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos