Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

In this video tutorial, we can see how to replace the air filter on a Toyota C-HR. The first thing to do is to purchase a new air filter. Get inside the vehicle and turn off the engine, then pull the handbrake.

Pull the bonnet release lever and lift the bonnet, securing it with the prop rod. Using a 10mm spanner, loosen the screw on the hose clamp; now unclip the clips of the air filter box. Once unclipped, lift the cover of the air filter box; remove the original filter and replace it with the new one. Once the filter is in place, replace the cover of the box and reassemble all parts in reverse order.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Replacement of the engine air filter for the Toyota CH-R
Replacement of the engine air filter for the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Below we will see the instructions that will allow us to disassemble and replace the engine air filter of the Toyota CH-R. First, we open the hood of…
How to Open the Bonnet on the Toyota C-HR?
How to Open the Bonnet on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this tutorial, you will see how to open the bonnet on the Toyota C-HR, a very simple operation that follows the standard procedure of most vehicle…
How to Install a Cone Air Filter on a Toyota C-HR
How to Install a Cone Air Filter on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Learn how to fit a cone sports air filter on a Toyota C-HR Hybrid: in fact, compared to the date of the video, cone filters are now available almost …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos