Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Highlander - Headlight

Toyota Highlander (2014-2019 / Xu50)
How to disassemble the front headlights in the Toyota Highlander?
In this tutorial, we can see how to replace the front headlights in the Toyota Highlander, an extremely simple and fast operation. First of all, we lift the …read all…
Posted on 18 April 2024 by ScegliAuto
Toyota Highlander (2008-2013 / Xu40)
How do you remove the Toyota Highlander headlight?
To be able to remove the headlight from the Toyota Highlander you have to go and open the hood, so that you have access to the screws and rivets that hold the …read all…
Posted on 9 April 2023 by ScegliAuto
Toyota Highlander (2008-2013 / Xu40)
How to replace the Toyota Highlander headlight
In this video tutorial today we can see how to remove the front headlight of the first generation Toyota Highlander. Open the hood, disconnect all the relative …read all…
Posted on 27 March 2024 by ScegliAuto
Air conditioning (1) Car stereo (4) Roof Rack Bars (1) Battery (10) Spark plugs (3) Key (12) -board computer (12) Checks and maintenance (33) Oil pan (1) Headlight (3) Tail light (5) Air filter (11) Cabin air filter (7) Grille (1) Light bulb (3) Headlight bulb (8) Rear light bulb (4) Antifreeze liquid (1) Handle (2) Engine oil (2) Tires (9) Fuel pump (6) Instrument cluster (14) Wheel (2) Fuse box (9) Seat (1) Outside rearview mirror (1) Windscreen wipers (4) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos