Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Toyota Highlander
    4. : Rear light bulb

Toyota Highlander - Rear light bulb

Toyota Highlander (2001-2007 / Xu20)
How to replace the rear light bulbs of the Toyota Highlander
Through these short and simple instructions, we will see how to disassemble and replace the bulbs of the rear headlight of the Toyota Highlander. First, open …read all…
Posted on 20 April 2024 by ScegliAuto
Toyota Highlander (2008-2013 / Xu40)
How to replace the brake lights bulbs on a Toyota Highlander?
In this tutorial, we can see how to replace the brake light bulbs in the Toyota Highlander, a very simple and quick operation. First of all, make sure the key …read all…
Posted on 18 April 2024 by ScegliAuto
Toyota Highlander (2008-2013 / Xu40)
How to replace the rear light bulbs in the Toyota Highlander?
In this tutorial we can see how to replace the rear light bulbs in the Toyota Highlander. For this operation we will not need any particular tool, but only a …read all…
Posted on 2 October 2022 by ScegliAuto
Toyota Highlander (2014-2019 / Xu50)
How to replace the rear light bulbs in the Toyota Highlander?
Replacing the rear light bulbs in the Toyota Highlander is a very simple operation, let's see how to proceed in this tutorial. Starting with the light placed …read all…
Posted on 12 September 2022 by ScegliAuto
Air conditioning (1) Car stereo (4) Roof Rack Bars (1) Battery (10) Spark plugs (3) Key (12) -board computer (12) Checks and maintenance (33) Oil pan (1) Headlight (3) Tail light (5) Air filter (11) Cabin air filter (7) Grille (1) Light bulb (3) Headlight bulb (8) Rear light bulb (4) Antifreeze liquid (1) Handle (2) Engine oil (2) Tires (9) Fuel pump (6) Instrument cluster (14) Wheel (2) Fuse box (9) Seat (1) Outside rearview mirror (1) Windscreen wipers (4) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos