Do it yourself
Frequently asked questions about cars and motorcycles

Toyota Highlander - Fuel pump

Toyota Highlander (2001-2007 / Xu20)
Guide to disassembling the fuel pump of the Toyota Highlander.

Today's steps will show us how to disassemble and replace the fuel pump of the Toyota Highlander, following the instructions below. First, lift the vehicle and …read all…
Posted on 21 March 2024 by ScegliAuto
Toyota Highlander (2014-2019 / Xu50)
How to disassemble the fuel pump in the Toyota Highlander?

In this tutorial, we can see how to replace the fuel pump in the Toyota Highlander, a very simple and fast operation. Before proceeding, let's disconnect the …read all…
Posted on 11 October 2023 by ScegliAuto
Toyota Highlander (2001-2007 / Xu20)
How to disassemble the fuel pump of the Toyota Highlander.

Today we will discover the steps that will allow us to disassemble and replace the fuel pump of the Toyota Highlander. First of all, we open the rear doors and …read all…
Posted on 8 October 2023 by ScegliAuto
Toyota Highlander (2001-2007 / Xu20)
How to access the float in Toyota Highlander?

In this tutorial we can see how to disassemble the fuel pump, in order to access the float, in the Toyota Highlander, a very simple and fast operation. Before …read all…
Posted on 7 April 2023 by ScegliAuto
Toyota Highlander (2001-2007 / Xu20)
How to replace the fuel pump on Toyota Highlander xu20

The guide shows how to perform the replacement of the Toyota Highlander xu20 fuel pump. The first step is to remove the finishing panel in the luggage …read all…
Posted on 11 June 2022 by ScegliAuto
Toyota Highlander (2008-2013 / Xu40)
How do I replace the Toyota Highlander fuel pump?

In order to replace the Toyota Highlander fuel pump you have to push the front seats forward, so that you can go to raise the carpet of the floor between the …read all…
Posted on 19 April 2024 by ScegliAuto

Air conditioning (1) Car stereo (4) Roof Rack Bars (1) Battery (10) Spark plugs (3) Key (12) -board computer (12) Checks and maintenance (33) Oil pan (1) Headlight (3) Tail light (5) Air filter (11) Cabin air filter (7) Grille (1) Light bulb (3) Headlight bulb (8) Rear light bulb (4) Antifreeze liquid (1) Handle (2) Engine oil (2) Tires (9) Fuel pump (6) Instrument cluster (14) Wheel (2) Fuse box (9) Seat (1) Outside rearview mirror (1) Windscreen wipers (4) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos