Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Float in the Toyota Highlander?

Model: Toyota Highlander Xu20 - Years 2001-2007
Part: Fuel pump

In this tutorial, you will see how to remove the fuel pump to access the float in the Toyota Highlander, a very simple and quick operation. Before proceeding, ensure that the key is not in the ignition to operate safely. Start by going to the rear of the vehicle, then remove the rear seat and move the carpet from the floor. Next, open the circular cap located on the left side, disconnect both the power connector and the fuel hose, and unscrew the large outer ring. At this point, you can extract the pump and proceed to replace the float.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Toyota Highlander Hybrid?
How to Set the Clock on a Toyota Highlander Hybrid?
Toyota Highlander (2008-2013 / Xu40) To set the clock on a Toyota Highlander Hybrid, turn on the ignition and then press and hold the DISP button located on the right side of the steerin…
How to reset the service in the Toyota Highlander?
How to reset the service in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial, we will see how to reset the service in the Toyota Highlander, an extremely simple and quick operation that should only be done aft…
How to Remove the Spare Wheel from the Toyota Highlander
How to Remove the Spare Wheel from the Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) This guide shows the steps to remove the spare wheel from the Toyota Highlander's underfloor storage. First, remove the plastic protective cover of t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos