Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Fuel Pump from the Toyota Highlander

Model: Toyota Highlander Xu20 - Years 2001-2007
Part: Fuel pump

Today's steps will show you how to remove and replace the fuel pump of the Toyota Highlander, following the instructions below. First, lift the vehicle and start removing the plastic cover of the tank by unscrewing all the fixing screws; then disconnect the fuel supply line and unscrew the fixing screws of the brackets to lower and remove the tank. At this point, you can access the fuel pump; disconnect the electrical connector and the fuel hose, removing and replacing the submerged pump with the new one!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from a Toyota Highlander
How to Remove the Fuel Pump from a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Today, we will go through the steps to remove and replace the fuel pump on a Toyota Highlander. First, open the rear doors and start by removing the …
How to Remove the Fuel Pump in the Toyota Highlander?
How to Remove the Fuel Pump in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial, you will see how to replace the fuel pump in the Toyota Highlander, a very simple and quick operation. Before proceeding, disconnec…
How to Replace the Fuel Pump on a Toyota Highlander?
How to Replace the Fuel Pump on a Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To replace the fuel pump on a Toyota Highlander, push the front seats forward to lift the carpet between the front and rear seats. You will also need…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos