Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump in the Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel pump in the Toyota Highlander, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to work safely.

Start by going to the rear of the vehicle, then remove the left rear seat by unscrewing each bolt located underneath the seat. Once done, open the circular cap and disconnect both the power connector and the fuel lines.

At this point, you can unscrew the large outer ring, extract the pump, and install the replacement if necessary.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

Guide to Removing the Fuel Pump from the Toyota Highlander
Guide to Removing the Fuel Pump from the Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Today's steps will show you how to remove and replace the fuel pump of the Toyota Highlander, following the instructions below. First, lift the vehic…
How to Remove the Fuel Pump from a Toyota Highlander
How to Remove the Fuel Pump from a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Today, we will go through the steps to remove and replace the fuel pump on a Toyota Highlander. First, open the rear doors and start by removing the …
How to Replace the Fuel Pump on a Toyota Highlander?
How to Replace the Fuel Pump on a Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To replace the fuel pump on a Toyota Highlander, push the front seats forward to lift the carpet between the front and rear seats. You will also need…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos