Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the 12V Battery on a Toyota Highlander

Model: Toyota Highlander Xu70 - Years 2020-2026
Part: Battery

In this guide, we will see the instructions that will allow you to remove and replace the 12V battery on a Toyota Highlander. First, open the rear tailgate and start by removing the floor panel and the plastic cover found at the bottom left, thus accessing the 12V battery; then disconnect both terminals (positive and negative), unscrewing the battery bracket screw to remove it, as shown in the video. Now install the new battery, of the correct type and with the same amperage; insert it the right way and then start the engine!

Posted on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Toyota Highlander
How to replace the battery of the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) These short and simple steps will show us how to disassemble and replace the 12V battery of the Toyota Highlander, following these simple instruction…
Replacing the Battery of the Toyota Highlander Xu50
Replacing the Battery of the Toyota Highlander Xu50
Toyota Highlander (2014-2019 / Xu50) Follow this brief and simple guide to remove and replace the battery of the Toyota Highlander Xu50, following the instructions below. First, open the…
Replacement of the Toyota Highlander key remote battery
Replacement of the Toyota Highlander key remote battery
Toyota Highlander (2020-2026 / Xu70) In short and simple steps, we will see how to disassemble and replace the battery of the Toyota Highlander key remote. First, take your remote and st…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos