Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change light on the Toyota RAV4 MK3 version

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Service warning light

In this video, we can see how to reset the maintenance light on the Toyota RAV 4 MK3 version: first, we need to turn on the ignition, and then press the "disp" button located on the steering wheel, at the bottom on the right side of the same. Select the "trip A" text on the display, then turn off the ignition. Now we need to press and hold the "disp" button again located on the right side of the steering wheel; while holding the button down, turn on the ignition again. We can release the button only after the display shows the text "0000000".

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine oil warning light on the Toyota RAV 4
How to reset the engine oil warning light on the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Through these brief instructions, you will learn how to reset the maintenance warning light for the engine oil change on the Toyota RAV 4. First, get…
Resetting the engine oil change indicator light of the Toyota RAV 4.
Resetting the engine oil change indicator light of the Toyota RAV 4.
Toyota Rav 4 (2006-2013 / MK 3, Xa30) These brief instructions will show us how to reset the maintenance light for the oil change of the Toyota RAV 4. First, we get into the car and start…
How to Reset the Service Light on the Toyota Rav 4 MK5
How to Reset the Service Light on the Toyota Rav 4 MK5
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide shows you the steps to reset the service light for the routine maintenance oil change on the fifth series Toyota Rav 4, following the inst…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos