Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Toyota Alphard 3.0 V6

Model: Toyota Alphard Vellfire MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Timing belt

See other generations:
Video tutorial

Discover the procedure for removing and replacing the timing belt on the Toyota Alphard 3.0 V6. First, lift the vehicle and start by removing the right front tire. Next, remove the serpentine belt and then the crankshaft pulley, as shown in the video.

At this point, remove the timing cover to access the timing belt, taking the necessary references for the timing belt replacement. Remove the old belt and replace it with a new original one, also replacing the water pump kit if necessary.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Serpentine Belt Tensioner on the Toyota Alphard Vellfire 3.5L V6
Guide to Replacing the Serpentine Belt Tensioner on the Toyota Alphard Vellfire 3.5L V6
Toyota Alphard Vellfire (2015-2023 / MK 3) In this brief and simple guide, follow the main instructions to remove and replace the serpentine belt tensioner on the Toyota Alphard Vellfire 3.5L …
How to Replace the Serpentine Belt on the Toyota Alphard Vellfire 3.5L
How to Replace the Serpentine Belt on the Toyota Alphard Vellfire 3.5L
Toyota Alphard Vellfire (2015-2023 / MK 3) In this brief guide, follow the main steps to remove and replace the serpentine belt on the Toyota Alphard Vellfire 3.5L. First, lift the vehicle and…
Where is the Fuse Box in the Toyota Alphard 2?
Where is the Fuse Box in the Toyota Alphard 2?
Toyota Alphard Vellfire (2008-2015 / MK 2) In this new mini guide dedicated to your Toyota Alphard second generation (2008-2015), discover where the fuse box is located, giving you access to t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos