Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper on a Toyota RAV 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

In a few simple steps, learn how to remove and replace the rear wiper on the Toyota RAV 4. First, move to the rear of the vehicle and lift the wiper arm; then remove the plastic clip and rotate the wiper until it detaches completely from the arm, as shown in the video.

Now, install the new wiper of the correct type and size; secure it properly onto the arm and gently lower the arm, finally securing the plastic clip!


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on the Toyota RAV 4
How to Replace the Rear Wiper Blade on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The steps outlined in this guide will show you how to remove and replace the rear wiper blade on the Toyota RAV 4. First, move to the rear and lift t…
Replacing the Wiper Blades on a Toyota Rav 4
Replacing the Wiper Blades on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) This brief and simple guide shows how to remove and replace the rear wiper blades on a Toyota Rav 4. First, remove the front wiper blades; to do this…
Replacement of the Rear Windscreen Wiper Blade
Replacement of the Rear Windscreen Wiper Blade
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This video shows how to replace the rubber blade of the rear windscreen wiper on a Toyota Rav 4. After removing the wiper from the arm, pull the rubb…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos