Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Windscreen Wiper Blade

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Windshield wipers

This video shows how to replace the rubber blade of the rear windscreen wiper on a Toyota Rav 4. After removing the wiper from the arm, pull the rubber blade off from the top. Extract the two metal supports from the old blade that keep it taut. Insert the two supports into the new blade, then fit the new blade into the wiper by reversing the removal procedure. For easier handling during this operation, you can lubricate the blade with water. Finally, check that the blade fits correctly with the wiper.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear windshield wiper of the Toyota RAV 4
Replacement of the rear windshield wiper of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In a few simple steps, we will see how to disassemble and replace the rear windshield wiper or rear wiper blade of the Toyota RAV 4. First, move to t…
Replacing the Rear Wiper Blade
Replacing the Rear Wiper Blade
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Replacing the rear wiper blade is generally a bit more complex than the front ones, as these blades are somewhat more specific and often require repl…
Guide to Replacing the Timing Belt on the Toyota RAV 4 2.0 D
Guide to Replacing the Timing Belt on the Toyota RAV 4 2.0 D
Toyota Rav 4 (2000-2006 / Xa20, MK 2) This guide will show you how to remove and replace the timing belt on the Toyota RAV 4 2.0 D. In this case, the removal and replacement of the timing…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos