Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper Blade

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the rear wiper blade is generally a bit more complex than the front ones, as these blades are somewhat more specific and often require replacing the entire wiper arm since the blade alone is not sold separately. Moreover, even if you manage to find just the blade, it is always a specific replacement and not generic.

That said, start by lifting the cover cap of the nut securing the wiper arm, then lift the arm and detach the blade from its seat. Proceed in reverse to attach the new blade.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Remove the Washer Jets on Toyota Rav4 3
How to Remove the Washer Jets on Toyota Rav4 3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video, see the instructions that will allow you to remove and replace the rear washer jets on a third-generation Toyota Rav4. First, open the…
Wiper Blade Replacement on Toyota RAV 4
Wiper Blade Replacement on Toyota RAV 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Replacing the wiper blades on a Toyota RAV 4 (as with almost all car models) is a very simple task. Lift the arm of the wiper and remove the blade fr…
How to Remove the Rear Bumper on a Toyota RAV4
How to Remove the Rear Bumper on a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below are the instructions for removing and replacing the rear bumper on a Toyota RAV4, in simple and quick steps. First, open the tailgate and start…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos