Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Washer Jets on Toyota Rav4 3

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield washer nozzle

See other generations:
Video tutorial

In this video, see the instructions that will allow you to remove and replace the rear washer jets on a third-generation Toyota Rav4. First, open the boot lid and use a plastic lever to remove the side panels, unclipping them from the rear clips; then unscrew the screws found inside the holes with a screwdriver, as shown in the video.

At this point, remove the third brake light by disconnecting the electrical connector; then remove the washer jet by prying it out from the sides with something thin, and disconnect the fluid passage tube!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Lights on a Toyota RAV4?
How to Remove the Rear Lights on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, you will learn how to remove the rear lights on a Toyota RAV4, a straightforward task if you need to replace a bulb or the entire u…
How to Remove the Internal Rear View Mirror in the Toyota RAV4
How to Remove the Internal Rear View Mirror in the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial, you will see how to remove the internal rear view mirror in the Toyota RAV4, a very simple and quick operation. First, go inside th…
How to Replace the Radio in a Toyota RAV4?
How to Replace the Radio in a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To replace the radio in a Toyota RAV4, use a tool to pry off the trim located above the radio and along the passenger side of the dashboard. Once thi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos