Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to replace the car radio of the Toyota Rav4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: Car stereo
Operation: How to replace the car radio of the Toyota Rav4?

In order to replace the car radio of the Toyota RAV 4 you need to pry an object to remove the molding located above the radio and along the entire passenger side of the dashboard. By detaching this molding, it will then be possible to detach the plastic covers that surround the air vents, located on the sides of the radio. In this way the screws will be visible and can be completely unscrewed; furthermore, by disconnecting the connectors on the back of the device, it will be possible to remove the old radio and connect the new one. This must be fixed with the special screws covering everything with the corresponding plastics.


Posted on 4 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2006-2013 - What problems does the Toyota Rav 4 radio have? Read Answer
    • Rav 4 2006-2013 - How to reset the car radio of the Toyota Rav 4? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos