Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rav 4
  6. : How to remove the rear lights in the Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: Tail light
Operation: How to remove the rear lights in the Toyota RAV4?

In this tutorial we can see how to remove the rear lights in the Toyota RAV4, a very simple operation, to be carried out in case we need to replace a bulb or the entire element. First of all, make sure that the key is not inserted, then open the hatch and unscrew the two bolts indicated with a 10mm socket wrench. Once this is done, we grab the headlight, pull it towards us and disengage it from the bodywork. Finally, we proceed with the replacement of the damaged element, turning the bulbs counterclockwise to extract them from the housing.


Posted on 6 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos