Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement on Toyota RAV 4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Windshield wipers

Replacing the wiper blades on a Toyota RAV 4 (as with almost all car models) is a very simple task. Lift the arm of the wiper and remove the blade from the hook of the arm: note that this is shaped like an umbrella handle, so when fitting the new blade, first insert it into the arm through the designated hole and then rotate it to mount it onto the hook. Ensure that the blades are securely in place. Repeat the same procedure for both front wipers. Good luck!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Rear Windscreen Wiper Blade
Replacement of the Rear Windscreen Wiper Blade
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This video shows how to replace the rubber blade of the rear windscreen wiper on a Toyota Rav 4. After removing the wiper from the arm, pull the rubb…
How to Replace the Wiper Blade of a Toyota Rav 4
How to Replace the Wiper Blade of a Toyota Rav 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This video shows how to replace the front wiper blade of a Toyota Rav 4. Grasp the front wiper blade with your hands, pull it as shown in the video (…
How to Replace the Rear Wiper Blade on the Toyota RAV 4
How to Replace the Rear Wiper Blade on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The steps outlined in this guide will show you how to remove and replace the rear wiper blade on the Toyota RAV 4. First, move to the rear and lift t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos