Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on a Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Checks and maintenance

Today we will see how to reset the maintenance oil light on a Toyota RAV4, third series model. First, turn on the car's instrument panel and then press the ODO/TRIP button on the speedometer until the "TRIP A" screen appears on the information display. At this point, we must turn off the instrument panel and continue to hold down the ODO/TRIP button and turn on the vehicle's ignition without starting the engine. Once this is done, the reset procedure will begin, so continue to hold down the previous button until the reset is complete as shown in the video.

Posted on 27 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Toyota RAV4?
How to reset the service in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial we can see how to reset the service in the Toyota RAV4, an extremely simple and quick operation, to be carried out only after comple…
How to reset the service light on the Toyota RAV4?
How to reset the service light on the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial, we can see how to reset the service in the Toyota RAV4, an extremely simple and fast operation, to be carried out only once all sch…
How to Reset the Service Light on a Toyota RAV4?
How to Reset the Service Light on a Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Resetting the service light on a Toyota RAV4 is an extremely simple and quick operation; let’s see how to proceed in this tutorial. Before doing this…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos